Diagnostic Test

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

FUEL SYSTEM OR IGNITION SYSTEM DTCS PRESENT
1. Turn the ignition on.
2. With the scan tool, read DTCs.
  Are there any fuel or ignition system DTCs present?
  
  Yes
  - Perform the diagnostics for the fuel or ignition system related DTC(s) before proceeding with this diagnostic procedure.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
  No
  - Go To 2
PERFORM THE ENGINE CRANKS BUT DOES NOT START
1. Perform the ENGINE CRANKS BUT DOES NOT START diagnostic procedure. Refer to ENGINE CRANKS BUT DOES NOT START .
  Were any problems found?
  
  Yes
  - Perform the appropriate repair.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .
  No
  - Perform the ENGINE WILL NOT CRANK diagnostic procedure. Refer to ETC INTERMITTENT NO CRANK CONDITION .
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to POWERTRAIN VERIFICATION TEST .