Pickup Box
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Long cargo box shown in illustration. Short cargo box similar.
- Disconnect the fuel filler neck from the fuel tank. Refer to TANK, FUEL, REMOVAL or TANK, FUEL, REMOVAL .
- Remove the fuel filler from the cargo box and position it out of the way.
- If necessary, remove the fuel filler door from the cargo box. Refer to DOOR, FUEL FILL, REMOVAL .
- Disconnect the tail lamp wire harness from the underbody wire harness.
- If necessary, remove the tail lamp units and wire harness from the cargo box. Refer to LAMP, TAIL STOP TURN, REMOVAL .
- If necessary, remove the tailgate. Refer to TAILGATE, REMOVAL .
- If necessary, remove the rear bumper. Refer to BUMPER, REAR, REMOVAL .
- Remove the bolts (3) that secure the cargo box (1) to the frame (2) (six short box, eight long box) and remove the cargo box.