LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Anti-Lock Brake System (Abs) (Service Information)) >> Electrical >> Sensor, Wheel Speed, Rear >> Removal >> 1500/2500/3500

Sensor, Wheel Speed, Rear: Removal: 1500/2500/3500

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views typical.

Fig 1: Rear Wheel Speed Sensor & Mounting Bolt
GC0083404Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Disconnect the wheel speed sensor electrical connector (3).
  3. Remove the mounting bolt (1) from the sensor (4).
  4. Remove the sensor (4) from the brake caliper adapter.
scientia non olet · About LEMON Manuals