LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Tires & Wheels (Service Information) 1500) >> Removal >> Tire And Wheel Assembly

Tire And Wheel Assembly

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. If vehicle is equipped with wheel center caps covering wheel nuts, remove cap with appropriate removal tool utilizing notch formed into wheel near valve stem. Use care not to damage wheel coating.
  3. Remove five wheel mounting (lug) nuts from studs.
  4. Remove tire and wheel assembly from hub.
scientia non olet · About LEMON Manuals