LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1120 (Lamps/Lighting - Exterior (Service Information) 1500) >> Lamp, Cargo >> Installation >> Removal

Lamp, Cargo: Installation: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
    Fig 1: Cargo Lamp & Screws
    GC0173534Courtesy of CHRYSLER GROUP, LLC
  2. Remove two screws (1) securing the lamp.
    Fig 2: Cargo Lamp Connector
    GC0173497Courtesy of CHRYSLER GROUP, LLC
  3. Pull free from the vehicle bed to gain access to and disconnect the wiring harness connector (1).
scientia non olet · About LEMON Manuals