Sensor, Fuel Tank Pressure: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect and isolate the negative battery cable.
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .

Fig 1: Fuel Tank Pressure Sensor Electrical Connector
Courtesy of CHRYSLER GROUP, LLC
Unlock and disconnect the fuel tank pressure sensor wire harness connector (1).

Fig 2: Retaining Tab & Fuel Tank Pressure Sensor
Courtesy of CHRYSLER GROUP, LLC
Carefully disengage the lock tab (2), rotate and remove the fuel tank pressure sensor (1) from the fuel tank vapor tube.

Fig 3: Fuel Tank Pressure Sensor Seal
Courtesy of CHRYSLER GROUP, LLC
The fuel tank pressure sensor seal (1) can be reused if not damaged.