LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1115 (Emissions Control - 1500) >> Evaporative Emissions, Diesel >> Hose, Crankcase Breather >> Removal >> Removal

Hose, Crankcase Breather: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Cover
GC0158138Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover (1).
    Fig 2: Removing/Installing Intake Manifold Silencer
    GC0157987Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the breather hose (3) at left upper timing cover.
    Fig 3: Crankcase Vent Heater, Air Inlet Hose, Breather Hose & Connector
    GC0146788Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the CCV hose heater wire harness connector (4).
  5. Disconnect the CCV hose (1) from intake air tube.
scientia non olet · About LEMON Manuals