Rear Park Brake Cable

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Parking Brake Cable

Courtesy of CHRYSLER GROUP, LLC

1 - PARKING BRAKE CABLE

Raise and support the vehicle.
Lockout the parking brake cable (1).

Fig 2: Brake Cable End & Lever
Courtesy of CHRYSLER GROUP, LLC

2- LEVER

3- CABLE END

Fig 3: Park Brake Cable End, Bracket & Adjuster Nut

Courtesy of CHRYSLER GROUP, LLC

Loosen cable adjuster nut (4).
Remove the rear park brake cable from the intermediate park brake cable.
Compress tabs on cable end fitting on the rear park brake cable to the frame mount bracket. Then pull the cable through the bracket.
Disengage the park brake cable end (3).
Disengage the park brake cable from the bracket (4).