Front - Light Duty

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rotor, Caliper, Hub/Bearing, Knuckle & Bolt

Courtesy of CHRYSLER GROUP, LLC

1 - CALIPER

2 - ROTOR

3 - HUB/BEARING

4 - KNUCKLE

5 - CALIPER ADAPTER BOLT

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the wheel and tire assembly.
NOTE:
Do not allow brake hose to support caliper adapter assembly.

Fig 2: Caliper Slide Pin Bolts, Mounting Bolts & Banjo Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the two caliper adaptor bolts (1) from the steering knuckle, remove caliper adapter assembly, and hang aside.
Remove the rotor (2) from the hub/bearing (3).