Adapter, Disc Brake Caliper: Removal: Front

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Caliper, Adapter, Slide Pin Bolts, Brake Line & Banjo Bolt

Courtesy of CHRYSLER GROUP, LLC

Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
Remove the front wheel and tire assembly.
Remove the caliper slide pin bolts (3, 7). Refer to CALIPER, DISC BRAKE, REMOVAL .
CAUTION:
Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
Remove the disc brake caliper (2) from the adapter (2).

Fig 2: Brake Pads, Anti-Rattle Clips & Caliper Adapter Mounting Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove the inboard (3) and outboard (4) brake pads.
Remove and discard the caliper adapter mounting bolts (2).
Remove and transfer any necessary components.