LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Body - Interior & Exterior - 1500) >> Exterior >> Shield, Splash, Front Wheelhouse >> Removal >> Removal

Shield, Splash, Front Wheelhouse: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inner Shield Push Pins
GC0088996Courtesy of CHRYSLER GROUP, LLC
  1. Release the ABS harness push pin from the inner shield.
  2. Remove the push pins (2, 3, 4).
    Fig 2: Inner Shield Screws
    GC0088997Courtesy of CHRYSLER GROUP, LLC
  3. Remove the inner screws (3 and 4).
  4. Remove the screws securing the shield to the fascia and the outer fender flange (2).
  5. Release the outboard endge of the shield (1) from the fender flange and remove the shield (1).
scientia non olet · About LEMON Manuals