LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Tires & Wheels (Service Information)) >> Tires >> Winch, Spare Tire Carrier >> Installation >> Installation

Winch, Spare Tire Carrier: Installation: Installation

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Spare Tire Carrier Winch
GC0088899Courtesy of CHRYSLER GROUP, LLC
  1. Position the winch (1) on the crossmember. Install the bolts (2) and tighten to 20 N.m (15 ft.lbs.).
  2. Remove the supports and lower the vehicle.
    NOTE:

    "Do NOT use impact tools on the Spare Tire Winch assembly to raise or lower the Spare Tire".

  3. Install the spare tire back into position.
scientia non olet · About LEMON Manuals