Cooler And Hoses, Charge Air: Installation: Hoses

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: CAC Hose & EGR Air Flow Control Valve

Courtesy of CHRYSLER GROUP, LLC

Install the Charge Air Cooler (CAC) hose to the EGR air flow control valve (2) and lock the retaining clip.

Fig 2: Right Charge Air Cooler (CAC) Hose Clamp
Courtesy of CHRYSLER GROUP, LLC
Install the right CAC hose (1) and securely tighten the clamp to 6 N.m (53 in. lbs.).

Fig 3: Charge Air Cooler (CAC) Hose & Locking Retainer At Turbocharger
Courtesy of CHRYSLER GROUP, LLC
Install the CAC hose (2) from the turbocharger elbow and lock the retaining clip (1).

Fig 4: Identifying CAC Resonator And Nuts
Courtesy of CHRYSLER GROUP, LLC
Install the CAC resonator (2). Tighten nuts (1) to 10 N.m (89 in. lbs.).

Fig 5: Left Charge Air Cooler (CAC) Hose Clamp
Courtesy of CHRYSLER GROUP, LLC
Install the left CAC hose (1) and tighten the clamp to 6 N.m (53 in. lbs.).
Connect the battery negative cable.