LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (3.0L Diesel (Service Information) 1500) >> Lubrication >> Pick-Up, Oil Pump >> Removal >> Removal

Pick-Up, Oil Pump: Removal: Removal

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the upper oil pan. Refer to PAN, OIL, REMOVAL .
    Fig 1: Oil Pump Pickup Tube & Bolts
    GC0146702Courtesy of CHRYSLER GROUP, LLC
  3. Remove the bolts (1) and the oil pump pickup tube (2) from oil pump.
    Fig 2: Oil Pump Pickup Tube & O-Ring
    GC0146703Courtesy of CHRYSLER GROUP, LLC
  4. Remove and discard the O-ring seal (2).
scientia non olet · About LEMON Manuals