LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1103 (3.0L Diesel (Service Information) 1500) >> Cylinder Head >> Rocker Arm, Valve >> Installation >> Installation

Rocker Arm, Valve: Installation: Installation

WARNING: This page is about a different car, the 2016 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rocker Arms & Hydraulic Lifters
GC0146669Courtesy of CHRYSLER GROUP, LLC
NOTE:

Rocker arms and lifters must be installed in the same location as when removed.

  1. Install the rocker arm (1) and lifter (2) assembly in the same location as noted during removal.
  2. Install the camshaft. Refer to CAMSHAFT, ENGINE, INSTALLATION .
scientia non olet · About LEMON Manuals