LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Base Brakes (Service Information)) >> Parking Brake >> Cable, Parking Brake >> Removal >> Right Rear Cable

Right Rear Cable

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locking Out Parking Brake Cable
GC0091777Courtesy of CHRYSLER GROUP, LLC
1 - LOCKING PLIERS
2 - PARKING BRAKE CABLE
  1. Raise and support the vehicle.
  2. Lockout the parking brake cable (2) .
  3. Loosen the brake cable at the equalizer and adjuster nut.
    Fig 2: Parking Brake Cable Mount & Lever
    GC0083395Courtesy of CHRYSLER GROUP, LLC
    1 - SUPPORT PLAT
    2 - CABLE MOUNT
    3 - PARK BRAKE LEVER
    4 - CABLE
  4. Remove the right cable from the front cable.
  5. Remove the right cable from the equalizer.
  6. Remove the cable from the frame bracket.
  7. Remove the cable from the axle bracket.
  8. Remove the cable bracket from the shock bracket.
  9. Remove the brake cable (4) from the brake lever (3). Refer to Fig 2.
scientia non olet · About LEMON Manuals