LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Rear

Rotor, Brake: Removal: Rear

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Rotor & Caliper
GC0091769Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle
  2. Remove the tire and wheel assembly.
  3. Remove the disc brake caliper (3). Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. Remove the caliper adapter (2) bolts. Refer to ADAPTER, DISC BRAKE CALIPER, REMOVAL .
  5. Remove the retaining clips and rotor assembly (1).
scientia non olet · About LEMON Manuals