LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Base Brakes (Service Information)) >> Hydraulic/Mechanical >> Rotor, Brake >> Removal >> Rear Dual Wheels

Rear Dual Wheels

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Rotor & Hub (Dual Wheel)
GC0108017Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle
  2. Remove the tire and wheel assembly.
  3. Remove the disc brake caliper. Refer to CALIPER, DISC BRAKE, REMOVAL .
  4. Remove the caliper adapter bolts.
  5. Remove the rear axle shaft from the housing on dual rear wheels. Refer to SHAFT, AXLE, REMOVAL .
    Fig 2: Hub & Bolts
    GC0108018Courtesy of CHRYSLER GROUP, LLC
    1 - Hub Bolts
    2 - Socket
  6. Remove the hub and rotor assembly.
  7. Disassemble the hub from the rotor if needed by removing the bolts (1).
scientia non olet · About LEMON Manuals