Adapter, Disc Brake Caliper: Installation: Rear
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Caliper Adapter Wrench (special tool #10186, Wrench, Caliper Bolt) must be used to torque the upper caliper adapter bolts for the 2500 and 3500 series trucks.
- Install the caliper adapter mounting bolts (4) and tighten to specifications per the Adapter Bolt Torque chart. Use the proper Caliper Adapter Wrench for the upper bolts only.
- Install the anti-rattle clips (2).
- Install the inboard and outboard pads (1).
- Install the caliper mounting bolts and tighten to 30 N.m (22 ft. lbs).
- Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .
ADAPTER BOLT TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Caliper Adapter Mounting Bolts (1500) | 163 | 120 | - |
| Caliper Adapter Mounting Bolts Upper (2500 and 3500) | 226 | 163 | - |
| Caliper Adapter Mounting Bolts Lower (2500 and 3500) | 264 | 190 | - |