LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Linkage, Link And Coil >> Drag Link, Steering, Link And Coil >> Removal >> RH - To Tie Rod

RH - To Tie Rod

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Link And Coil Steering System Components
GC0143914Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the drag link to tie rod nut (10).
  3. Loosen the nut/bolt on the drag link adjuster sleeve (3) as necessary.
  4. Remove the drag link (2) from the tie rod (6). (3).
  5. Remove the drag link (2) from the adjuster sleeve (3).
scientia non olet · About LEMON Manuals