LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Removal >> Damper - 4500/5500

Damper - 4500/5500

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Steering Damper, Linkage Bracket, Nuts & Bolts
GC0152015Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the steering damper mounting nut and bolt (4) at the axle.
  3. Remove the steering damper mounting nut and bolt (2) at the linkage bracket (5).
  4. Remove the steering damper (3).
scientia non olet · About LEMON Manuals