LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Damper - 4500/5500

Damper - 4500/5500

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Steering Damper, Linkage Bracket, Nuts & Bolts
GC0152015Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper (3) on the axle bracket, install the bolt and nut (4) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  2. Position the steering damper (3) on the linkage bracket (5), install the bolt and nut (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  3. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals