LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Damper - 2500/3500

Damper - 2500/3500

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Link And Coil Steering System Components
GC0143914Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper (8) on the axle bracket. Install the bolt and nut (9) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
    Fig 2: Identifying Steering Damper & Linkage Bracket Bolt
    GC0137167Courtesy of CHRYSLER GROUP, LLC
  2. Position the steering damper (1) on the linkage bracket bolt (7), install the nut (6) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  3. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals