LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Linkage, Link And Coil >> Damper, Steering, Link And Coil >> Installation >> Bracket - 4500/5500

Bracket - 4500/5500

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All views are typical.

Fig 1: Steering Damper, Linkage Bracket, Nuts & Bolts
GC0152015Courtesy of CHRYSLER GROUP, LLC
  1. Position the steering damper bracket (5), install the bolts and nuts (1) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  2. Position the steering damper (3), install the bolt and nut (2) and tighten to specifications. Refer to LINKAGE, LINK AND COIL, SPECIFICATIONS .
  3. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals