Diesel Engine Tool Connections
WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Connect Hose Assembly (special tool #6959, Assembly, Hose) (1) to the valve side of Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3), and connect Adapter (special tool #8185-2, Adapter, Power Steering Tester) (2) to the hose assembly.
- Connect Power Steering Hose (special tool #6713, Hose, Power Steering) (6) to the gauge side of Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3), and connect P/S Adapter (special tool #8630-1, Adapter Power Steering) (5) to the hose assembly.
- Disconnect the P/S pump pressure line at the hydro-boost connection.
- Connect the hose from the valve side of the Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3) to the hydro-boost line.
- Connect the hose from the gauge side of the Power Steering Analyzer (special tool #6800, Analyzer, Power Steering) (3) to the P/S pump pressure line at the hydro-boost connection.
- Proceed with the Flow and Pressure Test. Refer to TEST PROCEDURE .