LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Steering System) >> Column >> Lever, Gearshift >> Removal >> Lever Only

Lever Only

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper and lower column shrouds. Refer to SHROUD, STEERING COLUMN, REMOVAL .
    Fig 1: Gearshift Lever Assembly Components
    GC0088327Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the gearshift harness connector (5).
  4. Disconnect the gearshift harness retainers (6).
  5. Remove the gearshift lever pinch bolt (7) from the gearshift lever assembly (2).
  6. Remove the gearshift lever (1) from the gearshift lever assembly (2).
scientia non olet · About LEMON Manuals