LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Front Suspension & Wheel Alignment) >> Front, Independent Front Suspension >> Shock Absorber, Suspension >> Installation >> 4X4-Coil Over

4X4-Coil Over

WARNING: This page is about a different car, the 2012 RAM Pickup and 2012 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

All suspension components should be tighten with the weight of the vehicle on them (curb height).

Fig 1: Shock Assembly & Stabilizer Link Lower Nut
GC0091569Courtesy of CHRYSLER GROUP, LLC
  1. Install the shock (1) back in place in the vehicle.
    Fig 2: Upper Shock Nuts
    GC0091567Courtesy of CHRYSLER GROUP, LLC
  2. Install the upper part of the shock (2) into the frame bracket (3).
  3. Install the upper nuts (1) and tighten to specifications. Refer to SPECIFICATIONS . .
    Fig 3: Lower Shock Mount
    GC0091568Courtesy of CHRYSLER GROUP, LLC
  4. Install the lower part of the shock (5) into the lower control arm shock bushing (7).
  5. Install and position bolt (6) so head of bolt is facing rearward of vehicle and hand start nut. Tighten the bolt (6) and nut to specifications. Refer to SPECIFICATIONS . .
  6. Install the upper ball joint to the knuckle and install the retaining nut and tighten to specifications. Refer to SPECIFICATIONS . .
  7. Install the axle hub nut and tighten to specifications. Refer to SPECIFICATIONS . .
  8. Install the stabilizer link lower nut and tighten to specifications. Refer to SPECIFICATIONS . .
  9. Reconnect the wheel speed sensor wiring to the knuckle and upper control arm.
  10. Install the rotor. Refer to ROTOR, BRAKE, INSTALLATION .
  11. Install the caliper adapter with the caliper. Refer to ADAPTER, DISC BRAKE CALIPER, INSTALLATION .
  12. Remove the support from the lower control arm outboard end.
  13. Install the tire and wheel assembly. Refer to WHEELS, STANDARD PROCEDURE .
  14. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals