Diagnostic Test
WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE THE TIPM IF THE DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE
- Using the scan tool, read the active DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace and program the Totally Integrated Power Module in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.
- Using the scan tool, read the active DTCs.