LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Totally Integrated Power Module (TIPM) - Electrical Diagnostics - 3500 Cab & Chassis, 4500 & 5500) >> Diagnosis and Testing >> B2104-Ignition Run/Start Control Circuit Low >> Set Condition:

Set Condition:

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The Totally Integrated Power Module (TIPM) will set this DTC within 500 ms if the Ignition Run/Start Control Output Circuit voltage is less than the expected value.

scientia non olet · About LEMON Manuals