Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Pickup. However, it is still accessible from the selected car via links, so may be relevant.

PCM FROM ANOTHER VEHICLE INSTALLED
NOTE:
This DTC is set when a PCM from another vehicle is installed into the current vehicle.

Has another PCM been installed?

Yes
- Replace the PCM in accordance with the Service Information. Refer to MODULE, Powertrain Control , Removal , or MODULE, Powertrain Control, 6.7L Diesel [ETJ] , Removal .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Go To 2.
OTHER CAN-C MODULES SET VIN MISMATCH
Is the VIN Mismatch DTC set in other CAN-C modules?

Yes
- Replace the PCM in accordance with the Service Information. Refer to MODULE, Powertrain Control , Removal , or MODULE, Powertrain Control, 6.7L Diesel [ETJ] , Removal .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Replace the TIPM in accordance with the Service Information. Refer to MODULE, Totally Integrated Power (TIPM) , Removal .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .