LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (6.7L Diesel - Mil Light On Pretest Procedure, Diesel AFTERTREATMENT Validation, Pre-Diagnostic Troubleshooting Procedure, Pcm/ECM/TCM Programming, Powertrain Verification Test & Intermittent Condition - 3500 Cab & Chassis, 4500 & 5500) >> Standard Procedure >> Pcm/ECM / TCM Programming >> Section 3 - Authorized MODIFCATION Label

Section 3 - Authorized MODIFCATION Label

WARNING: This page is about a different car, the 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The following step is required by law when reprogramming a PCM/ECM and/or TCM.

Type the necessary information on the "Authorized Modification Label" and attach near the VECI label.

Fig 1: Authorized Modification Label
GC0094476Courtesy of CHRYSLER LLC
  1. Powertrain Control / Transmission Control Module Part Numbers (Insert P/Ns) Used
  2. Change Authority: TSB XX--XX
  3. Dealer Code: XXXXX
  4. Date: XX-XX-XX