LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.6L Engine (Service Information)) >> Engine Block >> ROD, Piston and Connecting >> Cleaning >> Cleaning

ROD, Piston and Connecting: Cleaning: Cleaning

WARNING: This page is about a different variant/trim than selected.
CAUTION:

DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.

CAUTION:

Do not remove the piston pin from the piston and connecting rod assembly.

  1. Using a suitable cleaning solvent clean the pistons in warm water and towel dry.
  2. Use a wood or plastic scraper to clean the ring land grooves.
scientia non olet · About LEMON Manuals