Diagnostic Test
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
VERIFY OPERATION OF THE BUTTON
- With the scan tool, erase DTCs.
- Press and release the button three times.
- Wait 60 seconds.
- With the scan tool, read DTCs.
Is DTC: B1441-00-VES EJECT INPUT BUTTON STUCK active?
Yes
- Replace the External Disc Module (EDM) in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- Test complete.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .