LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 943 (Body Control Module (BCM) - DTCS B182C-11 To U1433-24 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> U1433-24-Implausible Ignition Switch Status Message Received - Signal Stuck High >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The BCM detects that the CAN bus message transitions between ignition off and ignition on, but the hardwired ignition switch input voltage from the RF Hub module did not change states.

scientia non olet · About LEMON Manuals