LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 930 (68RFE Automatic Transmission (Service Information) 2500 Hd & 3500 Hd) >> Cover, Oil Pump >> Installation >> Installation

Cover, Oil Pump: Installation: Installation

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Cover & Snap Ring
GC0109093Courtesy of CHRYSLER GROUP, LLC
NOTE:

To avoid contamination and garter spring dislodgement, do not handle the front cover seal (4) when positioning the front cover into the transmission case. 

  1. Position a new front cover (1) into the transmission case.
    Fig 2: Front Cover Installation Tool
    GC0109181Courtesy of CHRYSLER GROUP, LLC
  2. Using the front cover installation tool (special tool #9955, Installer, Front Cover) (1) and a dead-blow mallet, install the front cover into transmission case.
    Fig 3: Front Cover & Snap Ring
    GC0109093Courtesy of CHRYSLER GROUP, LLC
  3. Install the snap ring (3) into the transmission case.
  4. Apply RTV silicone to the oil pan and install the transmission oil pan.
  5. Tighten the bolts to 12 N.m (105 in. lbs.).
scientia non olet · About LEMON Manuals