Valve, Short Runner: Installation: 6.4L

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Short Runner Valve Actuator Rubber O-Ring Seal

Courtesy of CHRYSLER GROUP, LLC

Install a new short runner valve actuator rubber O-ring seal (1).

Fig 2: Short Runner Valve Components
Courtesy of CHRYSLER GROUP, LLC
Position the short runner valve (SRV) actuator (2) to the intake manifold. Tighten the retaining bolts (3) to 5 N.m (44 in. lb.).
Install the SRV cover (1).

Fig 3: Battery
Courtesy of CHRYSLER GROUP, LLC
Connect the negative battery cable (1).