Manifold, Fuel Drain: Installation: Installation
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Drain Valve, Drain Hose, Mounting Screws, Sensor Harness Connector & Filter Housing
NOTE:
The engine has a self-priming low-pressure fuel system. Refer to FUEL SYSTEM PRIMING - DIESEL .
- Install the drain valve (4) to filter housing (1) and securely tighten the four drain valve mounting screws.
- Connect drain hose (6) from the fuel drain valve.
- Start the engine and check for leaks.