Console Mounted

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The four retaining tabs on the rear of the media hub must be compressed for removal.

Disconnect and isolate the negative battery cable.

Fig 1: Locating Inner Tray Retaining Screws
Courtesy of CHRYSLER GROUP, LLC
Open the floor console storage bin and remove the rubber mat.
Remove the seven inner tray retaining screws (1).
Remove the inner tray enough to access the wire harness connectors on the media hub.

Fig 2: Media Hub Wire Harness Connectors & Retaining Tabs
Courtesy of CHRYSLER GROUP, LLC
Disconnect the wire harness connectors (1, 2) from the media hub.
Compress the four retaining tabs (3) on the media hub, to release the media hub from the inner tray and remove the media hub.