LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 891 (Emissions Control - 2500 Hd & 3500 Hd) >> Exhaust Gas RECIRCULATION Valve >> Sensor, EGR Temperature >> Removal >> Removal

Sensor, EGR Temperature: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover.
  3. Disconnect EGR Temperature Sensor harness connector.
  4. Remove EGR Temperature Sensor from EGR tube.
scientia non olet · About LEMON Manuals