LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 891 (Emissions Control - 2500 Hd & 3500 Hd) >> Exhaust Gas RECIRCULATION Valve >> Sensor, EGR Temperature >> Installation >> Installation

Sensor, EGR Temperature: Installation: Installation

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean EGR crossover tube at sensor mounting point.
  2. Install EGR temperature sensor to EGR tube. Tighten to 18 N.m (159 in. lbs.).
  3. Connect EGR temperature sensor harness connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals