LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 890 (Exhaust System - 2500 Hd & 3500 Hd) >> Pipe, Exhaust Extension >> Removal >> 5.7L

Pipe, Exhaust Extension: Removal: 5.7L

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the muffler. Refer to MUFFLER, EXHAUST, REMOVAL .
    Fig 1: Band Clamp Nuts & Exhaust Extension Pipe
    GC0169620Courtesy of CHRYSLER GROUP, LLC
  3. Saturate the band clamp nuts (1) with heat valve lubricant and allow 5 minutes for penetration.
  4. Loosen band clamp nuts and remove the exhaust extension pipe (2) from the Y-pipe.