LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 889 (Engine Cooling System - 2500 Hd & 3500 Hd) >> Engine >> Thermostat >> Removal >> 6.4L

Section 889 (Engine Cooling System - 2500 Hd & 3500 Hd): Engine: Thermostat: Removal: 6.4L

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Do not loosen the radiator draincock with the cooling system hot and pressurized. Serious burns from the coolant can occur.

  1. Disconnect the negative battery cable.
  2. Drain the cooling system. Refer to STANDARD PROCEDURE .
    Fig 1: Upper Radiator Hose
    GC0161633Courtesy of CHRYSLER GROUP, LLC
  3. Remove the upper radiator hose (4) at the thermostat housing (1) and position aside.
    Fig 2: Electrical Connector, Thermostat Housing Mounting Bolts & Thermostat
    GC0161529Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the electrical connector (1).
  5. Remove the thermostat housing mounting bolts (2), thermostat housing (3) and thermostat.
scientia non olet · About LEMON Manuals