LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 881 (Rear Suspension - 2500 Hd & 3500 Hd) >> Arm, Lower Control >> Removal >> Removal

Arm, Lower Control: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Support the rear axle with a suitable holding fixture.
    Fig 1: View Of Guide Bolt, Upper Control Arm Bolt And Nut & Upper Control Arm Front Bolt
    GC0088301Courtesy of CHRYSLER GROUP, LLC
  3. Remove the parking brake cable guide bolt (Left side only).
    Fig 2: Upper And Lower Control Arm Fasteners
    GC0161573Courtesy of CHRYSLER GROUP, LLC
  4. Remove the lower control arm bolt (4) and nut at the axle and discard the nut  .
  5. Remove the lower control arm bolt and nut (2) at the frame.
  6. Remove the lower control arm (3) from the vehicle.
scientia non olet · About LEMON Manuals