Special Tools
WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
| 10474 - Brackets, Engine Lifting (Originally Shipped In Kit Number(s) 10484.) |
|
| 10136 - Installer, Crankshaft Front Oil Seal (Originally Shipped In Kit Number(s) 10138.) |
|
| 10137 - Adapter, Charge Air (Originally Shipped In Kit Number(s) 10138.) |
|
| 10142 - Cummins Turbo Cleaning Kit (Originally Shipped In Kit Number(s) 10138-UPD.) |
|
| 10143 - Cummins Turbo Drilling Kit (Originally Shipped In Kit Number(s) 10138-UPD.) |
|
| 10143-4 - Drill Assembly (Originally Shipped In Kit Number(s) 10138-UPD.) |
|
| 10143-5 - Tap & Collar Assembly (Originally Shipped In Kit Number(s) 10138-UPD.) |
|
| 10368 - Set, Universal Protective Cap | |
| 7471B - Barring Tool (Originally Shipped In Kit Number(s) 6860.) |
|
| 8281 - Installer, Seal (Originally Shipped In Kit Number(s) 8267, 8267CC, 9697, 9698.) |
|
| 8319 - Compressor, Valve Spring (Originally Shipped In Kit Number(s) 8267, 8267CC.) |
|
| 8502 - Remover/Installer | |
| 8534B - Fixture, Driveline Support (Originally Shipped In Kit Number(s) 8534, 8534B, 8849, 9565.) |
|
| 9007 - Adapter, Compression Test (Originally Shipped In Kit Number(s) 8848, 8849, 8849CC.) |
|
| 9009 - Bracket, Engine Lifting (Originally Shipped In Kit Number(s) 8848, 8849, 8849CC.) |
|
| 9010A - Remover/Installer, Fuel Injector (Originally Shipped In Kit Number(s) 8848, 8849.) |
|
| 9015 - Remover, High Pressure Connector (Originally Shipped In Kit Number(s) 8848, 8849, 8849CC.) |
|
| 9864 - Cap, Fuel Rail (Originally Shipped In Kit Number(s) 9860.) |
|
| 9866 - Wrench, Turbo Charger Bolt (Originally Shipped In Kit Number(s) 9860.) |
|
| C-3292A - Gauge, Pressure | |
| C-4171 - Driver Handle, Universal (Originally Shipped In Kit Number(s) 9202, 9202A-CAN, 9202CC, 9299, 9299CC, 9300A-CAN.) |
|
| C-647 - Spring Tester |