LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 877 (6.7L Engine (Service Information) 2500 Hd & 3500 Hd) >> Engine Block >> Rod, Piston And Connecting >> Standard Procedure >> Standard Procedure - Head Gasket Selection

Standard Procedure - Head Gasket Selection

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

There is only one head gasket available for the 6.7L engine.

  1. Measure piston protrusion for all six pistons.
  2. Calculate the average piston protrusion. Maximum allowable protrusion is 0.516 - 0.485 mm (0.006 - 0.019 in.).
scientia non olet · About LEMON Manuals