LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 877 (6.7L Engine (Service Information) 2500 Hd & 3500 Hd) >> Air Intake System >> Air Cleaner >> Installation >> Installation

Air Cleaner: Installation: Installation

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Air Cleaner Filter
GC0155196Courtesy of CHRYSLER GROUP, LLC
  1. Clean out the inside of air cleaner body.
  2. Install the new air cleaner element (1) and make sure the air cleaner element is fully seated in the air cleaner body.
    Fig 2: Identifying Air Cleaner Cover Alignment Tabs & Housing Slots
    GC0137132Courtesy of CHRYSLER GROUP, LLC
  3. Position air cleaner cover alignment tabs (1) into the housing slots (2) in all four locations and make sure the air cleaner cover is properly seated.
    Fig 3: Identifying Clamp, Air Cleaner Cover & Screws
    GC0155117Courtesy of CHRYSLER GROUP, LLC
  4. Securely tighten the air cleaner cover screws (3).
  5. Connect the air tube to air cleaner cover (2) and securely tighten clamp (1).