LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 874 (5.7L Engine (Service Information) 2500 Hd & 3500 Hd) >> Lubrication >> Sensor, Oil Temperature >> Removal >> Removal

Sensor, Oil Temperature: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Temperature Sensor Electrical Connector
GC0088118Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Disconnect the oil temperature sensor electrical connector (1).
    Fig 2: Oil Temperature Sensor
    GC0088119Courtesy of CHRYSLER GROUP, LLC
  3. Remove the oil temperature sensor (1).
scientia non olet · About LEMON Manuals