LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 873 (Battery System (Service Information) 2500 Hd & 3500 Hd) >> Sensor, Intelligent Battery (IBS) >> Removal >> Removal

Sensor, Intelligent Battery (IBS): Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intelligent Battery Sensor (IBS) Component Location
GC0147726Courtesy of CHRYSLER GROUP, LLC
  1. Remove the components to access the battery. Refer to BATTERY, REMOVAL .
    WARNING:

    Do not remove the captive nut, doing so will cause the stud to break.

  2. Loosen the captive nut (1).
  3. Disconnect the harness from the Intelligent Battery Sensor (IBS) (2).
  4. Remove the IBS (3) from the negative battery post.
  5. Remove the negative battery cable retainer to the IBS.
  6. Remove the IBS.
scientia non olet · About LEMON Manuals