Rollers, Wire Rope Guide: Removal: Removal

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Moving Clutch Lever To "Free Spool"

Courtesy of CHRYSLER GROUP, LLC

Move the clutch lever (2) to "Free Spool" and disengage the wire rope. Pull out a portion to give it some slack.

Fig 2: Roller, Shaft & Clips
Courtesy of CHRYSLER GROUP, LLC
Remove the clips (1).
Remove the roller axle rods (3) and remove the rollers (4) from the support bracket (2).

Fig 3: Horizontal Rollers & Bushings
Courtesy of CHRYSLER GROUP, LLC
Separate the bushings (1) from the rollers (2) and replace if necessary.

Fig 4: Roller Axle Rods, Rollers, Clips & Support Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove the clips (3).
Remove the roller axle rods (2) and remove the rollers (4) from the support bracket (1).

Fig 5: Vertical Rollers & Bushings
Courtesy of CHRYSLER GROUP, LLC
Separate the bushings (2) from the rollers (1) and replace if necessary.