LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Steering System - 2500 Hd & 3500 Hd) >> Linkage, Link And Coil >> Drag Link, Steering, Link And Coil >> Removal >> To Pitman Arm

To Pitman Arm

WARNING: This page is about a different car, the 2015 RAM 3500 HD and 2015 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drag Link, Steering, Link And Coil
GC0161598Courtesy of CHRYSLER GROUP, LLC
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the drag link to pitman arm nut (7).
  3. Loosen the jam nuts on the drag link adjuster sleeve (4).
    Fig 2: Removing Drag Link
    GC0108919Courtesy of CHRYSLER GROUP, LLC
  4. Remove the drag link (2) from the pitman arm (1), with (special tool #C-3894-A, Puller, Tie Rod) (3).
  5. Remove the drag link from the adjuster sleeve.
scientia non olet · About LEMON Manuals